Aries 20W LED Vapor Light

Model No.: LGS-TPLAR-06-20W
Power: 20W
CRI: Ra>80
Lumen output: 2,800lm
CCT: 3000-6500K
Input Voltage: 220-240VAC 50/60Hz
PF: >0.9
Degree of Protection: IP66
Lifespan: 50,000hrs
Warranty: 5 years


Aries LED vapor proof lights are simply structured and elegant designed, built with a soft polycarbonate diffused lens and advanced aluminum heatsink for superior heat dissipation, can replace up to 160W fluorescent tubes, and are an attractive and durable lighting solution.

Not only do the Aries LED vapor proof lights offer an extensive application range from commercial to industrial for any retrofit or new installation, but it is also a genuine champion for being energy-efficient and cost-effective. If you are looking for an ideal luminaire for your parking garage, warehouse, corridor, shop, etc, it will be your best option.


♦ Use branded LEDs and power supply, to ensure the product reliability and life expectancy;

♦ Adopt dust and waterproof structure design, protection level IP66;

♦ Aluminum profile and polycarbonate diffuser, high impact resistance;

♦ Fast and easy installation to replace existing lighting fixtures;

♦ Long lifetime over 50,000hours, 5 years warranty.


Product Name Aries LED Vapor Light
Model No. LGS-TPLAR-06-20W
Power 20W
Lumen Output 2,800lm
Luminous Efficiency 140lm/w
Color Temperature(CCT) 2700-6500K
Color Rendering Index(CRI) Ra>80
Beam Angle θ/2 120°
Input Voltage 220-240/100-240VAC
Frequency 50/60Hz
Power Factor >0.95
Start Time ≤0.1s
Driver Efficiency >88%
Total Harmonic Distortion <15%
Dimming On Request
Material Aluminum+Polycarbonate Diffuser
Degree of Protection IP66
Dimensions L600*W90*H74mm
Appearance Silver
Installation Hanging/Mounting
Working Tem. & Humidity -30℃~+50℃,10%~90%R.H.
Storage Temp. & Humidity -40℃~+70℃,0%~95%R.H.
Certificate CE, RoHS
Light Decay Rate Less than 3% in 6,000Hours
Lifespan ≥50,000Hrs
Warranty 5 years


Installation of Aries LED Vapor Light

Installation Requirements

1. Power off before installation, and read the instructions carefully;

2. Make sure the installation material can endure the lamp weight;

3. Connect lamp wire to match power wire, and seal the joint with insulation;

4. No matter which kind of installation method, the lamp must be installed reliably to prevent loosening and falling off.


1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;

2. Please confirm the input voltage, and frequency before use;

3. This product must be installed by professionals;

4. If there is any damage to the power wire or shell of the product, it should be taken as a defective product and do not use it;

5. Dangerous high voltage, non-professionals are not allowed to maintain the product;

6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.

    Contact Us