50W Iris LED Street Light

Model No.: LGS-SLIR-50W
Power: 50W
CRI: Ra>80
Lumen output: 7,000lm
CCT: 2700-6500K
Input Voltage: 100-240VAC 50/60Hz
PF: >0.95
Degree of Protection: IP66
Lifespan: 50,000hrs
Warranty: 5 years



– Die-casting technology with ADC12, excellent thermal management and balance the internal & external temperature, reduce chip Tj and light decay, prolong lifetime;

– Mounted with branded driver, overheat protection, high convert efficiency, high PF & surge protection, optional with dimming and photocell sensor;

– Optical UV-resistant polycarbonate lens with 94% light transmittance, IK08, high light efficiency up to 140lm/w;

– IP66 degree dust and waterproof protection, to meet all kinds of harsh outdoor environments;

– Available with pole-mounted and wall-mounted installation.


Model No. LGS-SLIR-50W
Power 50W
Lumen Output 7,000lm
Lumen Efficiency 140lm/w
CCT 3000/4000/5000/5700/6500K
CRI Ra>80(Ra>90 optional)
Chip Brand Lumileds
Beam Angle θ/2 70*140°
Light Decay Rate Less than 3% in 6,000Hours
Lifespan ≥50,000Hrs
Input Voltage 100-240VAC 50/60Hz
Power Factor PF>0.95
THD <10%
Driver Brand Sosen/ZH
Material Aluminum Housing+Polycarbonate Lens
Degree of Protection IP66
Dimensions 477*138*96mm
Finish Silver
Installation Mounting
Working Temperature -30℃~+50℃
Storage Temperature -40℃~+70℃
Certificate CE, RoHS
Warranty 5 years
Optional Functions 0-10V/PWM/DALI/Sensor Available on Request


Extensively applied on the roads such as main roads, expressways, streets, flyovers and

pavements and other areas that need outdoor lightings such as squares, schools, residential

quarters, industrial areas and parks.

Widely used for Street light illuminations, Residential Areas, Industrial Roads, Parks and

other outdoor lighting.


Mounting Instructions


1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;

2. Please confirm the input voltage and frequency before use;

3. This product must be installed by professionals;

4. If there is any damage to the power wire or shell of the product, it should be taken as a defective product and do not use it;

5. Dangerous high voltage, non-professionals are not allowed to maintain the product;

6. If the external soft cable or soft wire of the light is damaged, it should be replaced by the manufacturer service agent or personnel with similar qualifications to avoid danger.

    Contact Us