Moon LED Bulkhead Light 30W

Modello numero:: LGS-BL01-30W
Energia: 30W
CRI: fuori>80
Flusso luminoso in uscita: 3,600lm
CCT: 3000-6500K
Tensione di ingresso: 220-240VAC 50/60Hz
PF: >0.9
Grado di protezione: IP65
Durata: 50,000ore
Garanzia: 5 anni

Categoria: Etichetta:

Descrizione

LED bulkhead light is a direct replacement and energy-efficient alternative to traditional fluorescent 2D style bulkheads. These fixtures provide bright lumens output and an elegant appearance. The newest LED technology makes them an energy-efficient and maintenance-free lighting solution with a long life span of up to 50,000 Ore. Waterproof resistance makes it ideal for wet locations and anywhere extra lighting is needed.

Caratteristiche

♦ Endurable die-casting aluminum housing with good heat dissipation;

♦ Packed with branded LEDs and power supply to ensure product reliability and life expectancy;

♦ Saving more than 70% energia rispetto agli apparecchi di illuminazione tradizionali;

♦ Adopt dust and moisture-proof structure design, with polycarbonate diffuser and stainless steel screws;

♦ Waterproof IP65 degree protection;

♦ 5 anni di garanzia.

Indicazioni

nome del prodotto Moon LED Bulkhead Light
Modello numero. LGS-BL01-30W
Energia 30W
uscita Lumen 3,600lm
Lumen Efficiency 120lm / w
CCT 3000/4000/5000/5700/6500K
CRI fuori>80(fuori>90 opzionale)
SDCM <5
Angolo a fascio i / 2 120°
Tensione di ingresso 220-240VAC
Frequenza 50/60Hz
Fattore di potenza >0.9
Ora di inizio ≤0.1s
Distorsione Armonica Totale(THD) <10%
Driver Brand Philips/Osram
Materiale Aluminum housing+Polycarbonate Diffuser
Grado di protezione IP65
Impact Protection IK08
Dimensioni D350*H110mm
Aspetto White/Black/Grey
Installazione Wall/Ceiling Mounted
Tem di lavoro. & Umidità -30℃ ~ + 50 ℃,10%~ 90% R.H.
Temp di immagazzinaggio. & Umidità -40℃ ~ + 70 ℃,0%~ 95% R.H.
Certificato CE, RoHS
Luce Decay Rate Meno di 3% in 6,000Hours
Durata ≥50,000Hrs
Garanzia 5 anni
Funzioni opzionali Dimming on Request

Optional Appearance

Luce paratia a LED

Installation Requirements

1. Power off before installation, and read the instructions carefully;

2. Make sure the installation material can endure the lamp weight;

3. Connect lamp wire to match power wire, and seal the joint with insulation;

4. The lamp must be installed reliably to prevent loosening and falling off.

Avviso

1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;

2. Si prega di confermare la tensione di ingresso, and frequency before use;

3. Questo prodotto deve essere installato da professionisti;

4. Se non v'è alcun danno al filo di alimentazione o guscio del prodotto, it should be taken as a defective product and do not use it;

5. Dangerous high voltage, non-professionals are not allowed to maintain the product;

6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.

    Contattaci