Moon LED Bulkhead Light 24W
Modello numero:: LGS-BL01-24W
Energia: 24W
CRI: fuori>80
Flusso luminoso in uscita: 2,640lm
CCT: 3000-6500K
Tensione di ingresso: 220-240VAC 50/60Hz
PF: >0.9
Grado di protezione: IP65
Durata: 50,000ore
Garanzia: 5 anni
- Descrizione
- Indicazioni
- Ulteriori informazioni
- Inchiesta
Descrizione
LED bulkhead light is a direct replacement and energy-efficient alternative to traditional fluorescent 2D style bulkheads. These fixtures provide bright lumens output and an elegant appearance. The newest LED technology makes them an energy-efficient and maintenance-free lighting solution with a long life span of up to 50,000 Ore. Waterproof resistance makes it ideal for wet locations and anywhere extra lighting is needed.
Caratteristiche
♦ Endurable die-casting aluminum housing with good heat dissipation;
♦ Packed with branded LEDs and power supply to ensure product reliability and life expectancy;
♦ Saving more than 70% energia rispetto agli apparecchi di illuminazione tradizionali;
♦ Adopt dust and moisture-proof structure design, with polycarbonate diffuser and stainless steel screws;
♦ Waterproof IP65 degree protection;
♦ 5 anni di garanzia.
Indicazioni
nome del prodotto | Moon LED Bulkhead Light |
Modello numero. | LGS-BL01-24W |
Energia | 24W |
uscita Lumen | 2,640lm |
Lumen Efficiency | 110lm / w |
CCT | 3000/4000/5000/5700/6500K |
CRI | fuori>80(fuori>90 opzionale) |
SDCM | <5 |
Angolo a fascio i / 2 | 120° |
Tensione di ingresso | 220-240VAC |
Frequenza | 50/60Hz |
Fattore di potenza | >0.9 |
Ora di inizio | ≤0.1s |
Distorsione Armonica Totale(THD) | <10% |
Driver Brand | Philips/Osram |
Materiale | Aluminum housing+Polycarbonate Diffuser |
Grado di protezione | IP65 |
Impact Protection | IK08 |
Dimensioni | D300*H90mm |
Aspetto | White/Black/Grey |
Installazione | Wall/Ceiling Mounted |
Tem di lavoro. & Umidità | -30℃ ~ + 50 ℃,10%~ 90% R.H. |
Temp di immagazzinaggio. & Umidità | -40℃ ~ + 70 ℃,0%~ 95% R.H. |
Certificato | CE, RoHS |
Luce Decay Rate | Meno di 3% in 6,000Hours |
Durata | ≥50,000Hrs |
Garanzia | 5 anni |
Funzioni opzionali | Dimming on Request |
Optional Appearance
Installation Requirements
1. Power off before installation, and read the instructions carefully;
2. Make sure the installation material can endure the lamp weight;
3. Connect lamp wire to match power wire, and seal the joint with insulation;
4. The lamp must be installed reliably to prevent loosening and falling off.
Avviso
1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;
2. Si prega di confermare la tensione di ingresso, and frequency before use;
3. Questo prodotto deve essere installato da professionisti;
4. Se non v'è alcun danno al filo di alimentazione o guscio del prodotto, it should be taken as a defective product and do not use it;
5. Dangerous high voltage, non-professionals are not allowed to maintain the product;
6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.