Descripción

LED bulkhead light is a direct replacement and energy-efficient alternative to traditional fluorescent 2D style bulkheads. These fixtures provide bright lumens output and an elegant appearance. The newest LED technology makes them an energy-efficient and maintenance-free lighting solution with a long life span of up to 50,000 horas. Waterproof resistance makes it ideal for wet locations and anywhere extra lighting is needed.

Funciones

♦ Endurable die-casting aluminum housing with good heat dissipation;

♦ Packed with branded LEDs and power supply to ensure product reliability and life expectancy;

♦ Saving more than 70% energía en comparación con los accesorios de iluminación tradicionales;

♦ Adopt dust and moisture-proof structure design, with polycarbonate diffuser and stainless steel screws;

♦ Waterproof IP65 degree protection;

♦ 5 años de garantía.

Especificaciones

nombre del producto	Moon LED Bulkhead Light
N º de Modelo.	LGS-BL01-50W
Poder	50W
Salida de lumen	6,000Lm
Lumen Efficiency	120lm / w
Cct	3000/4000/5000/5700/6500K
Cri	Ra>80(Ra>90 Opcional)
SDCM	<5
Ángulo de haz i / 2	120°
Voltaje de entrada	220-240VACACIONES
Frecuencia	50/60hz
Factor de potencia	>0.9
Hora de inicio	≤0.1s
Distorsión armónica total(THD)	<10%
Driver Brand	Philips/Osram
Material	Aluminum housing+Polycarbonate Diffuser
Grado de protección	IP65
Impact Protection	IK08
Dimensiones	D350*H110mm
Apariencia	White/Black/Grey
Instalación	Wall/Ceiling Mounted
Trabajo Tem. & Humedad	-30℃ ~ 50 ℃，10%~ 90% H.R..
Temperatura de almacenamiento. & Humedad	-40℃ ~ + 70 ℃，0%~ 95% H.R..
Certificado	Ce, Rohs
Luz proporción de caída	Menos que 3% en 6,000Hours
Vida útil	≥50,000Hrs
Garantía	5 Años
Funciones opcionales	Dimming on Request

Optional Appearance

Installation Requirements

1. Power off before installation, and read the instructions carefully;

2. Make sure the installation material can endure the lamp weight;

3. Connect lamp wire to match power wire, and seal the joint with insulation;

4. The lamp must be installed reliably to prevent loosening and falling off.

Aviso

1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;

2. Confirme el voltaje de entrada, and frequency before use;

3. Este producto debe ser instalado por profesionales;

4. Si hay algún daño en el cable de alimentación o la carcasa del producto, it should be taken as a defective product and do not use it;

5. Dangerous high voltage, non-professionals are not allowed to maintain the product;

6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.