Moon LED Bulkhead Light 30W
Modelo No.: LGS-BL01-30W
Poder: 30W
Cri: Ra>80
Salida de lúmenes: 3,600Lm
Cct: 3000-6500K
Voltaje de entrada: 220-240VAC 50/60Hz
PF: >0.9
Grado de protección: IP65
Vida útil: 50,000Horas
Garantía: 5 Años
- Descripción
- Especificaciones
- Aprende más
- Consulta
Descripción
LED bulkhead light is a direct replacement and energy-efficient alternative to traditional fluorescent 2D style bulkheads. These fixtures provide bright lumens output and an elegant appearance. The newest LED technology makes them an energy-efficient and maintenance-free lighting solution with a long life span of up to 50,000 horas. Waterproof resistance makes it ideal for wet locations and anywhere extra lighting is needed.
Funciones
♦ Endurable die-casting aluminum housing with good heat dissipation;
♦ Packed with branded LEDs and power supply to ensure product reliability and life expectancy;
♦ Saving more than 70% energía en comparación con los accesorios de iluminación tradicionales;
♦ Adopt dust and moisture-proof structure design, with polycarbonate diffuser and stainless steel screws;
♦ Waterproof IP65 degree protection;
♦ 5 años de garantía.
Especificaciones
nombre del producto | Moon LED Bulkhead Light |
N º de Modelo. | LGS-BL01-30W |
Poder | 30W |
Salida de lumen | 3,600Lm |
Lumen Efficiency | 120lm / w |
Cct | 3000/4000/5000/5700/6500K |
Cri | Ra>80(Ra>90 Opcional) |
SDCM | <5 |
Ángulo de haz i / 2 | 120° |
Voltaje de entrada | 220-240VACACIONES |
Frecuencia | 50/60hz |
Factor de potencia | >0.9 |
Hora de inicio | ≤0.1s |
Distorsión armónica total(THD) | <10% |
Driver Brand | Philips/Osram |
Material | Aluminum housing+Polycarbonate Diffuser |
Grado de protección | IP65 |
Impact Protection | IK08 |
Dimensiones | D350*H110mm |
Apariencia | White/Black/Grey |
Instalación | Wall/Ceiling Mounted |
Trabajo Tem. & Humedad | -30℃ ~ 50 ℃,10%~ 90% H.R.. |
Temperatura de almacenamiento. & Humedad | -40℃ ~ + 70 ℃,0%~ 95% H.R.. |
Certificado | Ce, Rohs |
Luz proporción de caída | Menos que 3% en 6,000Hours |
Vida útil | ≥50,000Hrs |
Garantía | 5 Años |
Funciones opcionales | Dimming on Request |
Optional Appearance
Installation Requirements
1. Power off before installation, and read the instructions carefully;
2. Make sure the installation material can endure the lamp weight;
3. Connect lamp wire to match power wire, and seal the joint with insulation;
4. The lamp must be installed reliably to prevent loosening and falling off.
Aviso
1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;
2. Confirme el voltaje de entrada, and frequency before use;
3. Este producto debe ser instalado por profesionales;
4. Si hay algún daño en el cable de alimentación o la carcasa del producto, it should be taken as a defective product and do not use it;
5. Dangerous high voltage, non-professionals are not allowed to maintain the product;
6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.