Moon LED Bulkhead Light 8W
نموذج رقم: LGS-BL01-08W
السلطه: 8ث
كوستاريكا: را>80
إخراج التجويف: 800Lm
CCT: 3000-6500ك
مدخلات الجهد: 220-240فولت من التيار المتردد 50/60 هرتز
Pf: >0.9
درجة الحماية: IP65
عمر: 50,000ساعه
الضمان: 5 سنوات
- وصف
- المواصفات
- التعرف على المزيد
- التحقيق
وصف
LED bulkhead light is a direct replacement and energy-efficient alternative to traditional fluorescent 2D style bulkheads. These fixtures provide bright lumens output and an elegant appearance. The newest LED technology makes them an energy-efficient and maintenance-free lighting solution with a long life span of up to 50,000 ساعات. Waterproof resistance makes it ideal for wet locations and anywhere extra lighting is needed.
ميزات
♦ Endurable die-casting aluminum housing with good heat dissipation;
♦ Packed with branded LEDs and power supply to ensure product reliability and life expectancy;
♦ Saving more than 70% الطاقة مقارنة مع تركيبات الإضاءة التقليدية;
♦ Adopt dust and moisture-proof structure design, with polycarbonate diffuser and stainless steel screws;
♦ Waterproof IP65 degree protection;
♦ 5 ضمان سنوات.
المواصفات
اسم المنتج | Moon LED Bulkhead Light |
نموذج لا. | LGS-BL01-08W |
السلطه | 8ث |
التجويف الناتج | 800Lm |
Lumen Efficiency | 100lm/w |
CCT | 3000/4000/5000/5700/6500ك |
كوستاريكا | را>80(را>90 الاختياري) |
SDCM | <5 |
زاوية شعاع /2 | 120° |
مدخلات الجهد | 220-240بطاله |
التردد | 50/60هرتز |
عامل الطاقة | >0.9 |
وقت البدء | ≤ 0.1s |
التشويه التوافقي الكلي(THD) | <10% |
Driver Brand | Philips/Osram |
المواد | Aluminum housing+Polycarbonate Diffuser |
درجة الحماية | IP65 |
Impact Protection | IK08 |
ابعاد | D147*H53mm |
مظهر | White/Black/Grey |
التثبيت | Wall/Ceiling Mounted |
تيم العمل. & الرطوبه | -30درجة مئوية ~ +50 درجة مئوية,10%~ 90٪ R.H. |
درجة التخزين المؤقتة. & الرطوبه | -40درجة مئوية ~ +70 درجة مئوية,0%~ 95٪ R.H. |
شهاده | Ce, Rohs |
معدل تسوس الضوء | اقل 3% في 6000 ساعة |
عمر | ≥ 50,000 ساعة |
الضمان | 5 سنوات |
وظائف اختيارية | Dimming on Request |
Optional Appearance
Installation Requirements
1. Power off before installation, and read the instructions carefully;
2. Make sure the installation material can endure the lamp weight;
3. Connect lamp wire to match power wire, and seal the joint with insulation;
4. The lamp must be installed reliably to prevent loosening and falling off.
اشعار
1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;
2. يرجى تأكيد جهد الإدخال, and frequency before use;
3. يجب تثبيت هذا المنتج من قبل المحترفين;
4. إذا كان هناك أي ضرر لسلك الطاقة أو غلاف المنتج, it should be taken as a defective product and do not use it;
5. Dangerous high voltage, non-professionals are not allowed to maintain the product;
6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.