Moon LED Bulkhead Light 30W

نموذج رقم: LGS-BL01-30W
السلطه: 30ث
كوستاريكا: را>80
إخراج التجويف: 3,600Lm
CCT: 3000-6500ك
مدخلات الجهد: 220-240فولت من التيار المتردد 50/60 هرتز
Pf: >0.9
درجة الحماية: IP65
عمر: 50,000ساعه
الضمان: 5 سنوات

الفئه: العلامه:

وصف

LED bulkhead light is a direct replacement and energy-efficient alternative to traditional fluorescent 2D style bulkheads. These fixtures provide bright lumens output and an elegant appearance. The newest LED technology makes them an energy-efficient and maintenance-free lighting solution with a long life span of up to 50,000 ساعات. Waterproof resistance makes it ideal for wet locations and anywhere extra lighting is needed.

ميزات

♦ Endurable die-casting aluminum housing with good heat dissipation;

♦ Packed with branded LEDs and power supply to ensure product reliability and life expectancy;

♦ Saving more than 70% الطاقة مقارنة مع تركيبات الإضاءة التقليدية;

♦ Adopt dust and moisture-proof structure design, with polycarbonate diffuser and stainless steel screws;

♦ Waterproof IP65 degree protection;

♦ 5 ضمان سنوات.

المواصفات

اسم المنتج Moon LED Bulkhead Light
نموذج لا. LGS-BL01-30W
السلطه 30ث
التجويف الناتج 3,600Lm
Lumen Efficiency 120lm/w
CCT 3000/4000/5000/5700/6500ك
كوستاريكا را>80(را>90 الاختياري)
SDCM <5
زاوية شعاع /2 120°
مدخلات الجهد 220-240بطاله
التردد 50/60هرتز
عامل الطاقة >0.9
وقت البدء ≤ 0.1s
التشويه التوافقي الكلي(THD) <10%
Driver Brand Philips/Osram
المواد Aluminum housing+Polycarbonate Diffuser
درجة الحماية IP65
Impact Protection IK08
ابعاد D350*H110mm
مظهر White/Black/Grey
التثبيت Wall/Ceiling Mounted
تيم العمل. & الرطوبه -30درجة مئوية ~ +50 درجة مئوية,10%~ 90٪ R.H.
درجة التخزين المؤقتة. & الرطوبه -40درجة مئوية ~ +70 درجة مئوية,0%~ 95٪ R.H.
شهاده Ce, Rohs
معدل تسوس الضوء اقل 3% في 6000 ساعة
عمر ≥ 50,000 ساعة
الضمان 5 سنوات
وظائف اختيارية Dimming on Request

Optional Appearance

ضوء الحاجز LED

Installation Requirements

1. Power off before installation, and read the instructions carefully;

2. Make sure the installation material can endure the lamp weight;

3. Connect lamp wire to match power wire, and seal the joint with insulation;

4. The lamp must be installed reliably to prevent loosening and falling off.

اشعار

1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;

2. يرجى تأكيد جهد الإدخال, and frequency before use;

3. يجب تثبيت هذا المنتج من قبل المحترفين;

4. إذا كان هناك أي ضرر لسلك الطاقة أو غلاف المنتج, it should be taken as a defective product and do not use it;

5. Dangerous high voltage, non-professionals are not allowed to maintain the product;

6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.

    اتصل بنا