Descrição

Aries LED vapor proof lights are simply structured and elegant designed, built with a soft polycarbonate diffused lens and advanced aluminum heatsink for superior heat dissipation, can replace up to 160W fluorescent tubes, and are an attractive and durable lighting solution.

Not only do the Aries LED vapor proof lights offer an extensive application range from commercial to industrial for any retrofit or new installation, but it is also a genuine champion for being energy-efficient and cost-effective. If you are looking for an ideal luminaire for your parking garage, Armazém, corridor, shop, etc, it will be your best option.

Características

♦ Use branded LEDs and power supply, para garantir a confiabilidade do produto e a expectativa de vida;

♦ Adopt dust and waterproof structure design, protection level IP66;

♦ Aluminum profile and polycarbonate diffuser, alta resistência ao impacto;

♦ Fast and easy installation to replace existing lighting fixtures;

♦ Long lifetime over 50,000hours, 5 garantia anos.

Especificações

Nome do Produto	Áries LED Luz de vapor
modelo no.	LGS-TPLAR-06-20W
Poder	20W
Saída de Lumen	2,800Lm
eficiência luminosa	140lm / W
Temperatura de cor(Cct)	2700-6500K
Índice de renderização de cores(Cri)	Ra>80
Ângulo de feixe de i / 2	120°
Tensão de entrada	220-240/100-240Vac
Frequência	50/60hz
Fator de potência	>0.95
start Time	≤0.1s
Eficiência motorista	>88%
Distorção harmônica total	<15%
escurecimento	On Request
Material	Aluminum+Polycarbonate Diffuser
Grau de proteção	IP66
dimensões	L600*W90*H74mm
Aparência	Prata
Instalação	Pendurado/Montagem
Tem de trabalho. & Umidade	-30℃ ~ + 50 ℃，10%~ 90% H.R.
Temp de armazenamento. & Umidade	-40℃ ~ + 70 ℃，0%~ 95% H.R.
Certificado	CE CE, Rohs
Luz Decay Taxa	Menor que 3% em 6,000Hours
Vida útil	≥50,000Hrs
Garantia	5 Anos

Instalação

Installation Requirements

1. Power off before installation, and read the instructions carefully;

2. Make sure the installation material can endure the lamp weight;

3. Connect lamp wire to match power wire, and seal the joint with insulation;

4. No matter which kind of installation method, the lamp must be installed reliably to prevent loosening and falling off.

Aviso prévio

1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;

2. Por favor, confirme a tensão de entrada, and frequency before use;

3. Este produto deve ser instalado por profissionais;

4. Se houver qualquer dano para o fio de alimentação ou casca do produto, it should be taken as a defective product and do not use it;

5. Dangerous high voltage, non-professionals are not allowed to maintain the product;

6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.