Descrição

LED bulkhead light is a direct replacement and energy-efficient alternative to traditional fluorescent 2D style bulkheads. These fixtures provide bright lumens output and an elegant appearance. The newest LED technology makes them an energy-efficient and maintenance-free lighting solution with a long life span of up to 50,000 Horas. Waterproof resistance makes it ideal for wet locations and anywhere extra lighting is needed.

Características

♦ Endurable die-casting aluminum housing with good heat dissipation;

♦ Packed with branded LEDs and power supply to ensure product reliability and life expectancy;

♦ Saving more than 70% energia em comparação com luminárias tradicionais;

♦ Adopt dust and moisture-proof structure design, with polycarbonate diffuser and stainless steel screws;

♦ Waterproof IP65 degree protection;

♦ 5 garantia anos.

Especificações

Nome do Produto	Moon LED Bulkhead Light
modelo no.	LGS-BL01-18W
Poder	18W
Saída de Lumen	1,980Lm
Lumen Efficiency	110lm / W
Cct	3000/4000/5000/5700/6500K
Cri	Ra>80(Ra>90 opcional)
SDCM	<5
Ângulo de feixe de i / 2	120°
Tensão de entrada	220-240Vac
Frequência	50/60hz
Fator de potência	>0.9
start Time	≤0.1s
Distorção harmônica total(THD)	<10%
Driver Brand	Philips/Osram
Material	Aluminum housing+Polycarbonate Diffuser
Grau de proteção	IP65
Impact Protection	IK08
dimensões	D275*H80mm
Aparência	White/Black/Grey
Instalação	Wall/Ceiling Mounted
Tem de trabalho. & Umidade	-30℃ ~ + 50 ℃，10%~ 90% H.R.
Temp de armazenamento. & Umidade	-40℃ ~ + 70 ℃，0%~ 95% H.R.
Certificado	CE CE, Rohs
Luz Decay Taxa	Menor que 3% em 6,000Hours
Vida útil	≥50,000Hrs
Garantia	5 Anos
Funções opcionais	Dimming on Request

Optional Appearance

Installation Requirements

1. Power off before installation, and read the instructions carefully;

2. Make sure the installation material can endure the lamp weight;

3. Connect lamp wire to match power wire, and seal the joint with insulation;

4. The lamp must be installed reliably to prevent loosening and falling off.

Aviso prévio

1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;

2. Por favor, confirme a tensão de entrada, and frequency before use;

3. Este produto deve ser instalado por profissionais;

4. Se houver qualquer dano para o fio de alimentação ou casca do produto, it should be taken as a defective product and do not use it;

5. Dangerous high voltage, non-professionals are not allowed to maintain the product;

6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.