Co to są jasne kolory – Od ciepłego do chłodnego

Humans experience their environment not only through light and shadow, ale także poprzez kolory. Kolor światła lampy określa również wrażenie pomieszczenia i jest ważnym kryterium przy planowaniu biologicznie skutecznego oświetlenia.

Światło każdego źródła światła ma swój własny kolor, tak zwany kolor światła. Jest on opisany przez temperaturę barwową, mierzona w kelwinach (K). Im wyższa wartość temperatury, chłodnicy koloru światła.

The light colors of light sources are divided into three groups:

Warm white (WW, 2,700 – 3,500K) light is perceived as cozy and cozy.
Natural white (NW, 3,500 – 4,500K) light creates a more matter-of-fact mood.
Daylight white (CW, 4,500-6500K) light is cool and sober and is important for biologically effective lighting.

Determine color temperature: The Plank lamp

To determine the color temperature, the color impression of a lamp in the human eye is compared with that of an ideally glowing material (= black lamp or Plank lamp), the light color of which is determined by its temperature. If such a Plank heater is heated, it runs through a color range from red, orange, yellow and white to light blue.

CIE color chart and black body curve

The international lighting commission CIE has developed a two-dimensional standard color chart to provide a clear representation of the perceptible color space. This coordinate system contains all spectral colors on a horseshoe-shaped curve; the black body curve all color temperatures of white light.(please refer Moduł SDCM & MacAdam Ellipse i dlaczego są one ważne dla opraw oświetleniowych LED)

The color of a light source is now marked in the color chart depending on its color temperature on or close to the CIE spectral color band. This temperature is characterized by the most similar color temperature. This is the temperature that heated platinum takes on to appear in the same color as the light source. Low color temperatures of up to around 3,500 Kelvin describe warm, more yellow-reddish light colors and high color temperatures describe cool, white-blue light colors – similar to daylight, which also reaches around 6,500 Kelvin when the sky is overcast.

The light from lamps with the same light color can have a completely different spectral composition and therefore also a different color rendering. Z tego powodu, it is not possible to infer the quality of its color rendering from the light color of a lamp.

LED binning ensures uniform light colors

The production of LED chips requires special attention in terms of light color. Since there are tolerances in industrial batches within a batch, for example in the light color, LEDs are measured after production and sorted into so-called bins (= pots) depending on the tolerance class. A standard binning structure of the ANSI (American National Standards Institute) has existed since 2008. A color bin corresponds to a certain area in the CIE color triangle. Only the use of carefully selected binning groups guarantees uniform brightness and light colors – and is therefore an important quality feature.

Light color is also non-visual

The color of light also affects the circadian rhythm of humans. It is therefore an important criterion when planning biologically effective lighting modeled on natural daylight

Biologically effective in terms of daytime activation is above all daylight white light with higher blue components of at least 5,500 Kelvin (K). With LED modules, the color temperature can be selected through the interaction of different LEDs between warm and daylight white light colors. This technology is called tunable white(please refer to CCT tunable LED panel lights); their quality strongly depends on the control electronics.

If you have any questions about lighting colors of LED lighting fixtures, witamy w skontaktuj się z nami Bezpośrednio.