Moon LED Bulkhead Light 8W

Model nr.: LGS-BL01-08W
Macht: 8W
Cri: Ra>80
Lumen-uitgang: 800Lm
Gdt: 3000-6500K
Ingangsspanning: 220-240Wisselstroom 50/60Hz
PF: >0.9
Mate van bescherming: IP65
Levensduur: 50,000Uur
Garantie: 5 Jaar

Categorie: Tag:

Beschrijving

LED bulkhead light is a direct replacement and energy-efficient alternative to traditional fluorescent 2D style bulkheads. These fixtures provide bright lumens output and an elegant appearance. The newest LED technology makes them an energy-efficient and maintenance-free lighting solution with a long life span of up to 50,000 uur. Waterproof resistance makes it ideal for wet locations and anywhere extra lighting is needed.

Functies

♦ Endurable die-casting aluminum housing with good heat dissipation;

♦ Packed with branded LEDs and power supply to ensure product reliability and life expectancy;

♦ Saving more than 70% energie in vergelijking met traditionele verlichtingsarmaturen;

♦ Adopt dust and moisture-proof structure design, with polycarbonate diffuser and stainless steel screws;

♦ Waterproof IP65 degree protection;

♦ 5 jaar garantie.

Specificaties

productnaam Moon LED Bulkhead Light
Modelnr. LGS-BL01-08W
Macht 8W
Lumen output 800Lm
Lumen Efficiency 100lm / w
Gdt 3000/4000/5000/5700/6500K
Cri Ra>80(Ra>90 Optionele)
SDCM SDCM <5
Straalhoek i / 2 120°
Ingangsspanning 220-240VAC
Frequentie 50/60hz
Krachtfactor >0.9
Starttijd ≤0.1s
Totale harmonische vervorming(THD) <10%
Driver Brand Philips/Osram
Materiaal Aluminum housing+Polycarbonate Diffuser
Mate van bescherming IP65
Impact Protection IK08
Dimensies D147*H53mm
Verschijning White/Black/Grey
Installatie Wall/Ceiling Mounted
Werken Tem. & Vochtigheid -30℃ ~ +50 ℃,10%~ 90% relatieve vochtigheid.
Temperaturen van de opslag. & Vochtigheid -40℃ ~ + 70 ℃,0%~ 95% relatieve vochtigheid.
Certificaat Ce, Rohs
Light Decay Rate Minder dan 3% in 6,000Hours
Levensduur ≥ 50.000 uur
Garantie 5 Jaar
Optionele functies Dimming on Request

Optional Appearance

LED-schot licht

Installation Requirements

1. Power off before installation, and read the instructions carefully;

2. Make sure the installation material can endure the lamp weight;

3. Connect lamp wire to match power wire, and seal the joint with insulation;

4. The lamp must be installed reliably to prevent loosening and falling off.

Merk op

1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;

2. Bevestig de ingangsspanning, and frequency before use;

3. Dit product moet worden geïnstalleerd door professionals;

4. Als er enige schade aan de stroomkabel of de dop van het product, it should be taken as a defective product and do not use it;

5. Dangerous high voltage, non-professionals are not allowed to maintain the product;

6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.

    Neem contact op