Descrizione

Aries LED vapor proof lights are simply structured and elegant designed, built with a soft polycarbonate diffused lens and advanced aluminum heatsink for superior heat dissipation, can replace up to 160W fluorescent tubes, and are an attractive and durable lighting solution.

Not only do the Aries LED vapor proof lights offer an extensive application range from commercial to industrial for any retrofit or new installation, but it is also a genuine champion for being energy-efficient and cost-effective. If you are looking for an ideal luminaire for your parking garage, magazzino, corridor, shop, eccetera, it will be your best option.

Caratteristiche

♦ Use branded LEDs and power supply, per garantire l'affidabilità del prodotto e l'aspettativa di vita;

♦ Adopt dust and waterproof structure design, protection level IP66;

♦ Aluminum profile and polycarbonate diffuser, resistenza ad alto impatto;

♦ Fast and easy installation to replace existing lighting fixtures;

♦ Long lifetime over 50,000hours, 5 anni di garanzia.

Indicazioni

nome del prodotto	Luce a vapore LED Ariete
Modello numero.	LGS-TPLAR-06-20W
Energia	20W
uscita Lumen	2,800lm
efficienza luminosa	140lm / w
Temperatura di colore(CCT)	2700-6500K
Indice di resa cromatica(CRI)	fuori>80
Angolo a fascio i / 2	120°
Tensione di ingresso	220-240/100-240VAC
Frequenza	50/60Hz
Fattore di potenza	>0.95
Ora di inizio	≤0.1s
driver di efficienza	>88%
Distorsione Armonica Totale	<15%
oscuramento	On Request
Materiale	Aluminum+Polycarbonate Diffuser
Grado di protezione	IP66
Dimensioni	L600*W90*H74mm
Aspetto	Argento
Installazione	Hanging / Montaggio
Tem di lavoro. & Umidità	-30℃ ~ + 50 ℃，10%~ 90% R.H.
Temp di immagazzinaggio. & Umidità	-40℃ ~ + 70 ℃，0%~ 95% R.H.
Certificato	CE, RoHS
Luce Decay Rate	Meno di 3% in 6,000Hours
Durata	≥50,000Hrs
Garanzia	5 anni

Installazione

Installation Requirements

1. Power off before installation, and read the instructions carefully;

2. Make sure the installation material can endure the lamp weight;

3. Connect lamp wire to match power wire, and seal the joint with insulation;

4. No matter which kind of installation method, the lamp must be installed reliably to prevent loosening and falling off.

Avviso

1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;

2. Si prega di confermare la tensione di ingresso, and frequency before use;

3. Questo prodotto deve essere installato da professionisti;

4. Se non v'è alcun danno al filo di alimentazione o guscio del prodotto, it should be taken as a defective product and do not use it;

5. Dangerous high voltage, non-professionals are not allowed to maintain the product;

6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.