Elfin 100W LED Flood Light
Modello numero:: LGS-FLEF-100W
Energia: 100W
CRI: fuori>80
Flusso luminoso in uscita: 12,000lm
CCT: 3000-6500K
Tensione di ingresso: 100-240VAC 50/60Hz
PF: >0.95
Grado di protezione: IP66
Durata: 50,000ore
Garanzia: 5 anni
- Descrizione
- Indicazioni
- Ulteriori informazioni
- Inchiesta
Descrizione
The Elfin LED floodlights are a cost-effective alternative to traditional halogen bulbs and can be used in domestic and industrial environments. LED floodlights use up to 70% less power compared to traditional lamps. The Effin LED floodlight is made up of premium Die-cast Aluminum which has good heat dissipation. Oltre, it is more durable and provides you up to 50,000+ hours of lifespan.
Structural IP66 waterproof design, professional light distribution with different beam angles available for various applications. The compact design makes the Elfin LED floodlight is very convenient to install when you use it as an outdoor work light, or just as a LED outdoor flood light, luci di sicurezza, and more.
Caratteristiche
♦ Optimized aluminum alloy housing design for superior thermal management;
♦ High mechanical impact resistance and ingress protection, Progettazione impermeabile strutturale IP66;
♦ Packed with reputed branded LEDs and power supply to ensure product reliability and life expectancy;
♦ Clear tempered glass decreases the risk of lamp breaking for strong industrial applications;
♦ Professional light distribution with different beam angles is optional for your various applications;
♦ Compact in size and easy for transportation;
♦ Long lifetime over 50,000 Ore, 5 anni di garanzia.
Indicazioni
Modello numero. | LGS-FLEF-100W |
Energia | 100W |
uscita Lumen | 12,000lm |
Lumen Efficiency | 120lm / w |
CCT | 3000/4000/5000/5700/6500K |
CRI | fuori>80(fuori>90 opzionale) |
Chip Brand | Lumileds |
Angolo a fascio i / 2 | 10/25/45/60/90/120/70*150° |
Luce Decay Rate | Meno di 3% in 6,000Hours |
Durata | ≥50,000Hrs |
Tensione di ingresso | 100-240VAC 50/60Hz |
Fattore di potenza | PF>0.95 |
THD | <15% |
Driver Brand | Meanwell / Sosen |
Materiale | Aluminum Housing+Polycarbonate Lens+Tempered Glass Cover |
Grado di protezione | IP66 |
Dimensioni | 344*280*55mm |
Finish | Nero |
Installazione | Montaggio |
Temperatura di lavoro | -30℃ ~ + 50 ℃ |
Temperatura di conservazione | -40℃ ~ + 70 ℃ |
Certificato | CE, RoHS |
Garanzia | 5 anni |
Funzioni opzionali | 0-10V/PWM/DALI/DMX/Sensor Available on Request |
applicazioni
Widely used for shopping centers, exhibition halls, parking lots, Stadi, Palestre, billboards, parks, statues, government lighting decoration projects, landmarks or buildings, public squares and passages, building connecting passages, e altre applicazioni di luce interne o esterne.
Installazione
Installation Requirements
1. Power off before installation, and read the instructions carefully;
2. Make sure the installation material can endure the lamp weight;
3. Connect lamp wire to match power wire, and seal the joint with insulation;
4. No matter which kind of installation method, the lamp must be installed reliably to prevent loosening and falling off.
Avviso
1. Please first read the product specification carefully, and make sure the environment conform to the specification, then it can be used;
2. Si prega di confermare la tensione di ingresso, and frequency before use;
3. Questo prodotto deve essere installato da professionisti;
4. Se non v'è alcun danno al filo di alimentazione o guscio del prodotto, it should be taken as a defective product and do not use it;
5. Dangerous high voltage, non-professionals are not allowed to maintain the product;
6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.