Moon LED Bulkhead Light 50W
Modèle No.: LGS-BL01-50W
Puissance: 50W
CRI: dehors>80
Flux lumineux: 6,000lm
CCT: 3000-6500K
Tension d'entrée: 220-240VAC 50/60Hz
PF: >0.9
Degré de protection: IP65 (en)
Durée de vie: 50,000heures
garantie: 5 années
- Description
- Spécifications
- Pour en savoir plus
- Enquête
Description
LED bulkhead light is a direct replacement and energy-efficient alternative to traditional fluorescent 2D style bulkheads. These fixtures provide bright lumens output and an elegant appearance. The newest LED technology makes them an energy-efficient and maintenance-free lighting solution with a long life span of up to 50,000 Heures. Waterproof resistance makes it ideal for wet locations and anywhere extra lighting is needed.
fonctionnalités
♦ Endurable die-casting aluminum housing with good heat dissipation;
♦ Packed with branded LEDs and power supply to ensure product reliability and life expectancy;
♦ Saving more than 70% l’énergie par rapport aux appareils d’éclairage traditionnels;
♦ Adopt dust and moisture-proof structure design, with polycarbonate diffuser and stainless steel screws;
♦ Waterproof IP65 degree protection;
♦ 5 années de garantie.
Spécifications
Nom du produit | Moon LED Bulkhead Light |
modèle Non. | LGS-BL01-50W |
Puissance | 50W |
sortie Lumen | 6,000lm |
Efficacité du flux lumineux | 120lm / w |
CCT | 3000/4000/5000/5700/6500K |
CRI | dehors>80(dehors>90 optionnel) |
SDCM (SDCM) | <5 |
Angle de faisceau i / 2 | 120° |
Tension d'entrée | 220-240VAC |
La fréquence | 50/60Hz |
Facteur de puissance | >0.9 |
Heure de début | ≤0.1s |
Distorsion harmonique totale(THD) | <10% |
Marque du pilote | Philips/Osram |
Matériel | Aluminum housing+Polycarbonate Diffuser |
Degré de protection | IP65 (en) |
Protection contre les chocs | IK08 (en anglais) |
Dimensions | D350*H110mm |
Apparence | White/Black/Grey |
Installation | Wall/Ceiling Mounted |
Tem travail. & Humidité | -30℃ ~ 50 ℃,10%~ 90% une humidité relative. |
Température de stockage. & Humidité | -40℃ ~ 70 ℃,0%~ 95% humidité relative de. |
Certificat | CE, RoHS |
Lumière Decay Taux | Moins que 3% en 6,000Hours |
Durée de vie | ≥50,000Hrs |
garantie | 5 années |
Fonctions facultatives | Dimming on Request |
Optional Appearance
Installation Requirements
1. Power off before installation, and read the instructions carefully;
2. Make sure the installation material can endure the lamp weight;
3. Connect lamp wire to match power wire, and seal the joint with insulation;
4. The lamp must be installed reliably to prevent loosening and falling off.
Remarquer
1. Veuillez d’abord lire attentivement les spécifications du produit, et assurez-vous que l’environnement est conforme aux spécifications, Ensuite, il peut être utilisé;
2. S'il vous plaît confirmer la tension d'entrée, and frequency before use;
3. Ce produit doit être installé par des professionnels;
4. En cas de dommages au fil d'alimentation ou coquille du produit, Il doit être considéré comme un produit défectueux et ne pas l’utiliser;
5. Haute tension dangereuse, Les non-professionnels ne sont pas autorisés à entretenir le produit;
6. Si le câble souple externe ou le fil souple de la lampe est endommagé, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.