Descripción

Aries LED vapor proof lights are simply structured and elegant designed, built with a soft polycarbonate diffused lens and advanced aluminum heatsink for superior heat dissipation, can replace up to 160W fluorescent tubes, and are an attractive and durable lighting solution.

Not only do the Aries LED vapor proof lights offer an extensive application range from commercial to industrial for any retrofit or new installation, but it is also a genuine champion for being energy-efficient and cost-effective. If you are looking for an ideal luminaire for your parking garage, almacén, corridor, shop, etc., it will be your best option.

Funciones

♦ Use branded LEDs and power supply, para garantizar la fiabilidad del producto y la esperanza de vida;

♦ Adopt dust and waterproof structure design, protection level IP66;

♦ Aluminum profile and polycarbonate diffuser, alta resistencia al impacto;

♦ Fast and easy installation to replace existing lighting fixtures;

♦ Long lifetime over 50,000hours, 5 años de garantía.

Especificaciones

nombre del producto	Luz de vapor LED Aries
N º de Modelo.	LGS-TPLAR-12-40W
Poder	40W
Salida de lumen	5,600Lm
Eficacia luminosa	140lm / w
Temperatura del color(Cct)	2700-6500K
Índice de reproducción cromática(Cri)	Ra>80
Ángulo de haz i / 2	120°
Voltaje de entrada	220-240/100-240VACACIONES
Frecuencia	50/60hz
Factor de potencia	>0.95
Hora de inicio	≤0.1s
Eficiencia controlador	>88%
Distorsión armónica total	<15%
oscurecimiento	On Request
Material	Aluminum+Polycarbonate Diffuser
Grado de protección	IP66
Dimensiones	L1200*W90*H74mm
Apariencia	Plata
Instalación	Colgado/Montaje
Trabajo Tem. & Humedad	-30℃ ~ 50 ℃，10%~ 90% H.R..
Temperatura de almacenamiento. & Humedad	-40℃ ~ + 70 ℃，0%~ 95% H.R..
Certificado	Ce, Rohs
Luz proporción de caída	Menos que 3% en 6,000Hours
Vida útil	≥50,000Hrs
Garantía	5 Años

Instalación

Installation Requirements

1. Power off before installation, and read the instructions carefully;

2. Make sure the installation material can endure the lamp weight;

3. Connect lamp wire to match power wire, and seal the joint with insulation;

4. No matter which kind of installation method, the lamp must be installed reliably to prevent loosening and falling off.

Aviso

1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;

2. Confirme el voltaje de entrada, and frequency before use;

3. Este producto debe ser instalado por profesionales;

4. Si hay algún daño en el cable de alimentación o la carcasa del producto, it should be taken as a defective product and do not use it;

5. Dangerous high voltage, non-professionals are not allowed to maintain the product;

6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.