برج الحمل 75W LED ضوء بخار

نموذج رقم: LGS-TPLAR-15-75W
السلطه: 75ث
كوستاريكا: را>80
إخراج التجويف: 10,500Lm
CCT: 3000-6500ك
مدخلات الجهد: 220-240فولت من التيار المتردد 50/60 هرتز
Pf: >0.9
درجة الحماية: IP66
عمر: 50,000ساعه
الضمان: 5 سنوات

وصف

Aries LED vapor proof lights are simply structured and elegant designed, built with a soft polycarbonate diffused lens and advanced aluminum heatsink for superior heat dissipation, can replace up to 160W fluorescent tubes, and are an attractive and durable lighting solution.

Not only do the Aries LED vapor proof lights offer an extensive application range from commercial to industrial for any retrofit or new installation, but it is also a genuine champion for being energy-efficient and cost-effective. If you are looking for an ideal luminaire for your parking garage, مستودع, corridor, shop, الخ, it will be your best option.

ميزات

♦ Use branded LEDs and power supply, لضمان موثوقية المنتج ومتوسط العمر المتوقع;

♦ Adopt dust and waterproof structure design, protection level IP66;

♦ Aluminum profile and polycarbonate diffuser, مقاومة عالية التأثير;

♦ Fast and easy installation to replace existing lighting fixtures;

♦ Long lifetime over 50,000hours, 5 ضمان سنوات.

المواصفات

اسم المنتج برج الحمل ضوء بخار LED
نموذج لا. LGS-TPLAR-15-75W
السلطه 75ث
التجويف الناتج 10,500Lm
كفاءة مضيئة 140lm/w
درجة حرارة اللون(CCT) 2700-6500ك
مؤشر تقديم الألوان(كوستاريكا) را>80
زاوية شعاع /2 120°
مدخلات الجهد 220-240/100-240بطاله
التردد 50/60هرتز
عامل الطاقة >0.95
وقت البدء ≤ 0.1s
كفاءة السائق >88%
التشويه التوافقي الكلي <15%
يعتم On Request
المواد Aluminum+Polycarbonate Diffuser
درجة الحماية IP66
ابعاد L1500*W90*H74mm
مظهر الفضه
التثبيت شنقا / تركيب
تيم العمل. & الرطوبه -30درجة مئوية ~ +50 درجة مئوية,10%~ 90٪ R.H.
درجة التخزين المؤقتة. & الرطوبه -40درجة مئوية ~ +70 درجة مئوية,0%~ 95٪ R.H.
شهاده Ce, Rohs
معدل تسوس الضوء اقل 3% في 6000 ساعة
عمر ≥ 50,000 ساعة
الضمان 5 سنوات

التثبيت

Installation of Aries LED Vapor Light

Installation Requirements

1. Power off before installation, and read the instructions carefully;

2. Make sure the installation material can endure the lamp weight;

3. Connect lamp wire to match power wire, and seal the joint with insulation;

4. No matter which kind of installation method, the lamp must be installed reliably to prevent loosening and falling off.

اشعار

1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;

2. يرجى تأكيد جهد الإدخال, and frequency before use;

3. يجب تثبيت هذا المنتج من قبل المحترفين;

4. إذا كان هناك أي ضرر لسلك الطاقة أو غلاف المنتج, it should be taken as a defective product and do not use it;

5. Dangerous high voltage, non-professionals are not allowed to maintain the product;

6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.

    اتصل بنا